Index:

Faxing Orders
International Orders
Return Policy
Privacy Statement
Press Information
Legal Disclamer
Installing Your RockNob
Removing Shift Knob from Jeep Wrangler (1997 and newer)
Contacting RockNob

• FAX or Mail-In Orders:

  If you prefer not to use our secure on-line credit card payment system, you can print out a form suitable for FAX or mailing in the shopping cart checkout process. Include a check (or credit card information) for the total amount shown. We will ship your order within 5 days of recieving it.

• International Orders:

  We can accept international orders if you order on-line using your Visa or MasterCard. You can also mail or FAX us your order. Print out a form suitable for mailing from our shopping cart checkout process (be sure to include credit card information on the FAX). If mailing your order, get a cashiers check from your local bank (in your local currency) for the total amount printed on the form (you will have to convert from US Dollars into your local currency). Then mail the form and the cashiers check to the address above. Allow 2-3 weeks for your international order to arrive.

• Return or Exchange Policy:

  If for any reason you are not completely satisfied with your RockNob, please return it to the address above with a note explaining the reason for returning. We will happily exchange it for a new RockNob or give you a refund. Please feel free to e-mail us at the above address with questions, comments or problems.

• Privacy Statement:

  RockNob, LLC respects your privacy and will keep any and all personal information supplied to us completely confidential. We will not sell or distribute confidential information to any other person, company, organization, or alien race. We also promise not to pummell you with irritating junk e-mail.

• Press Information:

  For members of the press, we have compiled a summary sheet of information contained on our web site. Check it out by clicking here.

• Installation of Your RockNob:
  • RockNobs can be used on most any standard transmission vehicle. We have designed the universal adapter to work with both threaded and press on shift levers.
  • The universal adapter consists of the RockNob itself with the adapter sleeve mounted in it, a set of plastic cup shims, and set screws (see photo below).
  
  Figure 1 - RockNob and Universal Adapter Kit

  1. Remove the current gearshift knob.
  2. Find the plastic cup shim that best fits the top of your shift lever. Press it firmly onto the shift lever so it is completely seated and does not wiggle when moved (see Figure 2). (Note: we have designed the shims to fit the most common sizes of shift lever diameters. If one does not fit exactly, tightly wrap some electrical tape around the top of the shift lever to increase its diameter to fit one of the plastic cup shims included with your RockNob.)
  
  Figure 2 - Plastic Cup Shim Installed on Shift Lever
  3. Depending on the diameter of your shift lever at the position of the set screw holes, you will have to select either the short or long set screws to use in the next step. Try short ones first.

  4. Slide the RockNob down onto the shift lever making sure it is pushed all the way on. Now, position your RockNob so it feels good when shifting and tighten the set screws evenly, bit by bit. Only tighten enough to keep the knob from rotating in normal operations. Tightening the set screws too much can strip the treads in the mount. (See Figure 3.)
  
  Figure 3 - Adapter installed.

• Removing Shift Knob from Jeep Wrangler

  Starting in 1997 Jeep Wranglers went to a new shift knob mounting system. Not only did they change the thread size to M10x1.5 but they also hid the lock nut from view. To remove the standard rubberized shift knob from your wrangler (again 1997 and newer only) you must pry out the plastic piece at the top of the knob that has the shift pattern on it. Use a butter knife or a nail file and stick it between the hard plastic of the top cap and the soft rubber of the knob. Then get under the plastic cap and pry it out. This will then reveal the locknut. Use a socket wrench to remove this nut (I think it is a 14mm or 15mm socket). Now unscrew the knob from the shift lever. You are now free to ROCK YOUR STICK.

• How to contact us:

  RockNob

  12968 S. 5800 W.

  Herriman, Utah 84065

  (801)792-ROCK(7625)

  Fax:(801)-282-4324

  We want your feedback, comments or questions.

  E-mail us at: sales@rocknob.com

  Report Website Problems: RockNob Webmaster